TP-Link Archer D50: OpenWrt Compatibility Report
The TP-Link Archer D50 runs OpenWrt 25.12.1 on the ath79/generic target, and has been supported since 19.07.0. Its WiFi 5 (AC) wireless on the ath9k driver rates excellent for open-source driver support (0.85/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the TP-Link Archer D50, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros QCA9531 |
|---|---|
| CPU | 1 core @ 650 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 4 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Qualcomm Atheros QCA9531, Qualcomm Atheros QCA9882 |
| WLAN driver | ath9k, ath10k-ct |
| OpenWrt target | ath79 / generic |
| Package architecture | mips_24kc |
| Current release | 25.12.1 |
| Supported since | 19.07.0 |
| Install method | U-Boot TFTP recovery, U-Boot TFTP + serial recovery, see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.5 A |
| Device type | Home router |
| Estimated throughput | 81 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Archer D50
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: U-Boot TFTP recovery, U-Boot TFTP + serial recovery, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.