MikroTik RB962UiGS-5HacT2HnT (hAP ac): OpenWrt Compatibility Report
The MikroTik RB962UiGS-5HacT2HnT (hAP ac) runs OpenWrt 25.12.0 on the ath79/mikrotik target, and has been supported since 18.06.0. Its WiFi 5 (AC) wireless on the ath9k driver rates excellent for open-source driver support (0.85/1.0), installation is rated moderate, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
Some links are affiliate links. Learn more.
Specifications
| SoC | Qualcomm Atheros QCA9558 |
|---|---|
| CPU | 1 core @ 720 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Qualcomm Atheros QCA9558, Atheros AR9880 |
| WLAN driver | ath9k, ath10k-ct |
| OpenWrt target | ath79 / mikrotik |
| Package architecture | mips_24kc |
| Current release | 25.12.0 |
| Supported since | 18.06.0 |
| Install method | Mikrotik TFTP |
| Install difficulty | moderate |
| Power supply | 11-57 VDC barrel jack, 11-57 VDC passive PoE |
| Device type | Home router |
| Estimated throughput | 90 Mbps |
| Availability | available |
Installing OpenWrt on the RB962UiGS-5HacT2HnT (hAP ac)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Mikrotik TFTP.
Use TFTP server to load initramfs image of OpenWrt, and then use Web Interface to flash OpenWrt sysupgrade.bin
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Ruckus R500
Ubiquiti UniFi UK-Ultra
Ubiquiti AmpliFi Router (AFi-R)
Not sure which fits? Take the 60-second quiz.