Plasma Cloud PA1200: OpenWrt Compatibility Report
The Plasma Cloud PA1200 runs OpenWrt 25.12.2 on the ipq40xx/generic target, and has been supported since 21.02.0. Its WiFi 5 (AC) wireless on the ath10k-ct driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Plasma Cloud PA1200, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros IPQ4018 |
|---|---|
| CPU | 4 cores @ 717 MHz |
| RAM | 256 MB |
| Flash | 32 MB |
| Ethernet ports | 2 |
| USB | 1x 3.0 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Qualcomm Atheros IPQ4018 |
| WLAN driver | ath10k-ct |
| OpenWrt target | ipq40xx / generic |
| Package architecture | arm_cortex-a7_neon-vfpv4 |
| Current release | 25.12.2 |
| Supported since | 21.02.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12-24 VDC, 1.0A via barrel, or 802.3af/at PoE |
| Device type | Access point |
| Estimated throughput | 501 Mbps |
| Availability | not_available |
Installing OpenWrt on the PA1200
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.