MikroTik RBD53iG-5HacD2HnD (hap ac³): OpenWrt Compatibility Report
The MikroTik RBD53iG-5HacD2HnD (hap ac³) runs OpenWrt 24.10.4 on the ipq40xx/mikrotik target, and has been supported since 22.03.0. Its WiFi 5 (AC) wireless on the ath10k-ct driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
- Buy $118
- Baltic Networks US distributor, SKU RBD53iG-5HacD2HnD-US, 29 in stock, +$10.03 tariff surcharge at checkout $109
Some links are affiliate links. Learn more.
Specifications
| SoC | Qualcomm Atheros IPQ4019 |
|---|---|
| CPU | 4 cores @ 716 MHz |
| RAM | 256 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Qualcomm Atheros IPQ4019 |
| WLAN driver | ath10k-ct |
| OpenWrt target | ipq40xx / mikrotik |
| Package architecture | arm_cortex-a7_neon-vfpv4 |
| Current release | 24.10.4 |
| Supported since | 22.03.0 |
| Install method | U-Boot TFTP recovery, see git-commit |
| Install difficulty | moderate |
| Power supply | 12-28 VDC, 18-28V Passive PoE |
| Device type | Home router |
| Estimated throughput | 501 Mbps |
| Availability | available |
Installing OpenWrt on the RBD53iG-5HacD2HnD (hap ac³)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: U-Boot TFTP recovery, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.