Edimax EW-7476RPC: OpenWrt Compatibility Report
The Edimax EW-7476RPC runs OpenWrt 25.12.2 on the ramips/mt7620 target, and has been supported since 21.02.0. Its WiFi 5 (AC) wireless on the mt76 driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Edimax EW-7476RPC, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7620A |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 1 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | MediaTek MT7620A, MediaTek MT7612E |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7620 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 21.02.0 |
| Install method | GUI OEM, U-Boot TFTP + serial recovery |
| Install difficulty | easy |
| Power supply | 5 VDC, 1.5A |
| Device type | Repeater |
| Estimated throughput | 72 Mbps |
| Availability | discontinued |
Installing OpenWrt on the EW-7476RPC
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, U-Boot TFTP + serial recovery.
Official OpenWrt device page for the EW-7476RPC
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.