D-Link DWL-8610AP: OpenWrt Compatibility Report
The D-Link DWL-8610AP runs OpenWrt 24.10.4 on the bcm53xx/generic target, and has been supported since 23.05.0. Its WiFi 5 (AC) wireless on the b43 driver rates limited for open-source driver support (0.35/1.0), installation is rated easy, and it is no longer sold new. Its wireless does not work correctly under OpenWrt, so it is listed here for reference rather than as a recommendation.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the D-Link DWL-8610AP, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM47094 |
|---|---|
| CPU | 2 cores @ 1400 MHz |
| RAM | 512 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 2 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Broadcom BCM43431, Broadcom BCM43460 |
| WLAN driver | b43 |
| OpenWrt target | bcm53xx / generic |
| Package architecture | arm_cortex-a9 |
| Current release | 24.10.4 |
| Supported since | 23.05.0 |
| Install method | GUI OEM |
| Install difficulty | easy |
| Power supply | 12V, 2A via barrel, or 802.3at PoE |
| Device type | Access point |
| Estimated throughput | 489 Mbps |
| Availability | discontinued |
Installing OpenWrt on the DWL-8610AP
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.