Compex WPJ428: OpenWrt Compatibility Report
The Compex WPJ428 was supported by OpenWrt from 18.06.0 on the ipq40xx/generic target, but its last supported release has reached end of life. Its WiFi 5 (AC) wireless on the ath10k driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Compex WPJ428. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros IPQ4028 |
|---|---|
| CPU | 4 cores @ 710 MHz |
| RAM | 256 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 2 |
| USB | 1x 3.0 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | Qualcomm Atheros IPQ4028 |
| WLAN driver | ath10k |
| OpenWrt target | ipq40xx / generic |
| Package architecture | arm_cortex-a7_neon-vfpv4 |
| Current release | EOL |
| Supported since | 18.06.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12-24 VDC, Passive PoE 24 VDC, 24-56 VDC, PoE 802.3af |
| Device type | Home router |
| Estimated throughput | 496 Mbps |
| Availability | available |
Installing OpenWrt on the WPJ428
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Official OpenWrt device page for the WPJ428
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.