BOLT BL100: OpenWrt Compatibility Report
The BOLT BL100 runs OpenWrt 24.10.5 on the ramips/mt7620 target, and has been supported since 24.10.0. Its WiFi 5 (AC) wireless on the mt76 driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the BOLT BL100, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7620A |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 2 |
| WiFi generation | WiFi 5 (AC) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n/ac |
| WLAN hardware | MediaTek MT7620A, Mediatek MT76x2E |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7620 |
| Package architecture | mipsel_24kc |
| Current release | 24.10.5 |
| Supported since | 24.10.0 |
| Install method | Telnet, U-Boot TFTP + serial recovery, see git-commit |
| Install difficulty | moderate |
| Power supply | 12V/1A via barrel plug |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | not_available |
Installing OpenWrt on the BL100
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Telnet, U-Boot TFTP + serial recovery, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Ruckus R500
MikroTik RB962UiGS-5HacT2HnT (hAP ac)
Ubiquiti UniFi UK-Ultra
Not sure which fits? Take the 60-second quiz.