ZyXEL NBG-419N: OpenWrt Compatibility Report
The ZyXEL NBG-419N runs OpenWrt 25.12.1 on the ramips/rt305x target, and has been supported since 17.01.0. Its WiFi 4 (N) wireless on the rt2800pci driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the ZyXEL NBG-419N, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Ralink RT3352 |
|---|---|
| CPU | 1 core @ 384 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Ralink RT3352 |
| WLAN driver | rt2800pci |
| OpenWrt target | ramips / rt305x |
| Package architecture | mipsel_24kc |
| Current release | 25.12.1 |
| Supported since | 17.01.0 |
| Install method | RedBoot TFTP + serial recovery |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.0 A |
| Device type | Home router |
| Estimated throughput | 48 Mbps |
| Availability | discontinued |
Installing OpenWrt on the NBG-419N
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: RedBoot TFTP + serial recovery.
Official OpenWrt device page for the NBG-419N
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The NBG-419N ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| V2 shown above | ramips/rt305x | 25.12.1 | Ralink RT3352 |
| V1 | ramips/rt305x | EOL | Ralink RT3052 |
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.