ZBT WE526 (WE1626): OpenWrt Compatibility Report
The ZBT WE526 (WE1626) runs OpenWrt 25.12.2 on the ramips/mt7620 target, and has been supported since 24.10.0. Its WiFi 4 (N) wireless rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the ZBT WE526 (WE1626), which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7620N |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| OpenWrt target | ramips / mt7620 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 24.10.0 |
| Install method | GUI OEM, Sysupgrade, U-Boot web recovery |
| Install difficulty | easy |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | discontinued |
Installing OpenWrt on the WE526 (WE1626)
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, Sysupgrade, U-Boot web recovery.
Official OpenWrt device page for the WE526 (WE1626)
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.