Youku YK1, YK-L1, YK-L1W: OpenWrt Compatibility Report
The Youku YK1, YK-L1, YK-L1W runs OpenWrt 24.10.5 on the ramips/mt7620 target, and has been supported since 17.01.0. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Youku YK1, YK-L1, YK-L1W, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7620A |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 128 MB |
| Flash | 32 MB |
| Ethernet ports | 3 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7620A |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7620 |
| Package architecture | mipsel_24kc |
| Current release | 24.10.5 |
| Supported since | 17.01.0 |
| Install method | GUI OEM |
| Install difficulty | easy |
| Power supply | 12V 1A |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | discontinued |
Installing OpenWrt on the YK1, YK-L1, YK-L1W
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM.
https://www.minihere.com/how-to-update-firmware-on-u-boot.html or https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=eba0a8deb65de70b0d913f9ec8910640a79d0191
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.