Xunlong Orange Pi Zero Plus: OpenWrt Compatibility Report
The Xunlong Orange Pi Zero Plus runs OpenWrt 25.12.1 on the sunxi/cortexa53 target, and has been supported since 18.06.0. Its WiFi 4 (N) wireless on the other driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Xunlong Orange Pi Zero Plus. See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | Allwinner H5 |
|---|---|
| CPU | 4 cores @ 1200 MHz |
| RAM | 512 MB |
| Flash | 2 MB |
| Ethernet ports | 1 |
| USB | 1x 2.0, 1x Header, 1x OTG, 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Realtek RTL8189FTV |
| WLAN driver | other |
| OpenWrt target | sunxi / cortexa53 |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.1 |
| Supported since | 18.06.0 |
| Install method | Sunxi installation |
| Install difficulty | moderate |
| Power supply | 5 VDC, 2.0 A via USB Female Micro-B |
| Device type | Access point |
| Estimated throughput | 1000 Mbps |
| Availability | available |
Installing OpenWrt on the Orange Pi Zero Plus
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Sunxi installation.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.