Xunlong Orange Pi Plus: OpenWrt Compatibility Report
The Xunlong Orange Pi Plus runs OpenWrt 25.12.1 on the sunxi/cortexa7 target, and has been supported since 17.01.0. Its WiFi 4 (N) wireless rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Xunlong Orange Pi Plus, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Allwinner H3 |
|---|---|
| CPU | 4 cores @ 1600 MHz |
| RAM | 1024 MB |
| Flash | 8192 MB |
| Ethernet ports | 1 |
| USB | 4x 2.0, 1x OTG |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Realtek RTL8189ETV |
| OpenWrt target | sunxi / cortexa7 |
| Package architecture | arm_cortex-a7_neon-vfpv4 |
| Current release | 25.12.1 |
| Supported since | 17.01.0 |
| Install method | Sunxi installation |
| Install difficulty | moderate |
| Power supply | 5 VDC, 2.0A via barrel |
| Device type | Access point |
| Estimated throughput | 1000 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Orange Pi Plus
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Sunxi installation.
Official OpenWrt device page for the Orange Pi Plus
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.