Xiaomi MiWiFi Nano: OpenWrt Compatibility Report
The Xiaomi MiWiFi Nano runs OpenWrt 25.12.2 on the ramips/mt76x8 target, and has been supported since 17.01.0. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Xiaomi MiWiFi Nano, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7628 |
|---|---|
| CPU | 1 core @ 575 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 3 |
| USB | 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628 |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 17.01.0 |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | 5 VDC (µUSB) |
| Device type | Home router |
| Estimated throughput | 71 Mbps |
| Availability | discontinued |
Installing OpenWrt on the MiWiFi Nano
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
Official OpenWrt device page for the MiWiFi Nano
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.