WatchGuard Firebox T15-W (MS1AE3W): OpenWrt Compatibility Report
The WatchGuard Firebox T15-W (MS1AE3W) runs OpenWrt 25.12.4 on the mpc85xx/p1010 target, and has been supported since 25.12.0. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the WatchGuard Firebox T15-W (MS1AE3W), which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Freescale (NXP) P1010 |
|---|---|
| CPU | 1 core @ 533 MHz |
| RAM | 1024 MB |
| Flash | 1024 MB (NAND) |
| Ethernet ports | 3 |
| USB | Yes, 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Atheros AR9582 via Senao PCE3302AN |
| WLAN driver | ath9k |
| OpenWrt target | mpc85xx / p1010 |
| Package architecture | powerpc_8548 |
| Current release | 25.12.4 |
| Supported since | 25.12.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.25 A via barrel |
| Device type | Home router |
| Estimated throughput | 93 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Firebox T15-W (MS1AE3W)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.