WatchGuard Firebox T15 (MS1AE3): OpenWrt Compatibility Report
The WatchGuard Firebox T15 (MS1AE3) runs OpenWrt 25.12.4 on the mpc85xx/p1010 target, and has been supported since 25.12.0. Its No WiFi wireless on the none driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the WatchGuard Firebox T15 (MS1AE3), which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Freescale P1010 |
|---|---|
| CPU | 1 core @ 533 MHz |
| RAM | 1024 MB |
| Flash | 1024 MB (NAND) |
| Ethernet ports | 3 |
| USB | 1x 2.0 |
| WiFi generation | No WiFi |
| WLAN hardware | - |
| WLAN driver | none |
| OpenWrt target | mpc85xx / p1010 |
| Package architecture | powerpc_8548 |
| Current release | 25.12.4 |
| Supported since | 25.12.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.25A via barrel |
| Device type | Home router |
| Estimated throughput | 93 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Firebox T15 (MS1AE3)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Deciso DEC740
Mellanox Spectrum SN3420
Mellanox Spectrum SN2700
Not sure which fits? Take the 60-second quiz.