WatchGuard Firebox T10-W (DS3AE3): OpenWrt Compatibility Report

The WatchGuard Firebox T10-W (DS3AE3) runs OpenWrt 25.12.4 on the mpc85xx/p1010 target, and has been supported since 25.12.0. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.

Drivers: Fair (0.50) WiFi 4 (N) Install: moderate

Hardware data and retail listings last checked .

Discontinued. This model is no longer sold new, so this page is kept as a reference for people who already own one. See current alternatives.

Where to buy

We have no current retail listing for the WatchGuard Firebox T10-W (DS3AE3), which is no longer sold new. See current alternatives for devices you can still buy today.

Specifications

SoC Freescale P1010
CPU 1 core @ 533 MHz
RAM 512 MB
Flash 512 MB (NAND)
Ethernet ports 3
USB 1x 2.0
WiFi generation WiFi 4 (N)
Radios 2.4GHz: b/g/n
WLAN hardware Atheros AR9582 via Senao PCE3302AN
WLAN driver ath9k
OpenWrt target mpc85xx / p1010
Package architecture powerpc_8548
Current release 25.12.4
Supported since 25.12.0
Install method see git-commit
Install difficulty moderate
Power supply 12 VDC, 1.25A via barrel
Device type Home router
Estimated throughput 93 Mbps
Availability discontinued

Installing OpenWrt on the Firebox T10-W (DS3AE3)

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Still sold and well supported

GL.iNet GL-X300B (Collie)

WiFi 4 (N) Drivers: Excellent $126

KuWFi CPE830(D)

WiFi 4 (N) Drivers: Excellent

YunCore CPE830(D)

WiFi 4 (N) Drivers: Excellent

Not sure which fits? Take the 60-second quiz.