WatchGuard Firebox T10 (DS1AE3): OpenWrt Compatibility Report
The WatchGuard Firebox T10 (DS1AE3) runs OpenWrt 25.12.4 on the mpc85xx/p1010 target, and has been supported since 22.03.4. It has no wireless radio, and its open-source driver support rates fair (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the WatchGuard Firebox T10 (DS1AE3), which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Freescale P1010 |
|---|---|
| CPU | 1 core @ 533 MHz |
| RAM | 512 MB |
| Flash | 512 MB (NAND) |
| Ethernet ports | 3 |
| USB | 1x 2.0 |
| WiFi generation | No WiFi |
| OpenWrt target | mpc85xx / p1010 |
| Package architecture | powerpc_8548 |
| Current release | 25.12.4 |
| Supported since | 22.03.4 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.2 A via barrel |
| Device type | Home router |
| Estimated throughput | 93 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Firebox T10 (DS1AE3)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Deciso DEC740
Mellanox Spectrum SN3420
Mellanox Spectrum SN2700
Not sure which fits? Take the 60-second quiz.