VoCore VoCore2: OpenWrt Compatibility Report
The VoCore VoCore2 runs OpenWrt 25.12.2 on the ramips/mt76x8 target, and has been supported since 17.01.0. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated easy, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the VoCore VoCore2, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7628AN |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| Ethernet ports | 2 |
| USB | 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628AN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 17.01.0 |
| Install method | Sysupgrade |
| Install difficulty | easy |
| Power supply | 3.6-6.0 VDC, 74mA wifi standby, 230mA wifi full speed @5V input |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | not_available |
Installing OpenWrt on the VoCore2
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: Sysupgrade.
Official OpenWrt device page for the VoCore2
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.