TP-Link TL-WR810N: OpenWrt Compatibility Report
The TP-Link TL-WR810N was supported by OpenWrt from 18.06.0 on the ath79/generic target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the ath9k driver rates excellent for open-source driver support (0.85/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the TP-Link TL-WR810N, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros QCA9533 |
|---|---|
| CPU | 1 core @ 650 MHz |
| RAM | 32 MB |
| Flash | 8 MB |
| Ethernet ports | 2 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Qualcomm Atheros QCA9533 |
| WLAN driver | ath9k |
| OpenWrt target | ath79 / generic |
| Package architecture | mips_24kc |
| Current release | EOL |
| Supported since | 18.06.0 |
| Install method | GUI OEM, U-Boot TFTP recovery, see git-commit |
| Install difficulty | easy |
| Power supply | 100-240 VAC, 50/60Hz, 0.15A |
| Device type | Travel router |
| Estimated throughput | 81 Mbps |
| Availability | discontinued |
Installing OpenWrt on the TL-WR810N
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, U-Boot TFTP recovery, see git-commit.
For TFTP, rename -factory image to wr810nv1_tp_recovery.bin
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.