TP-Link EAP660 HD: OpenWrt Compatibility Report

TP-Link EAP660 HD router

The TP-Link EAP660 HD runs OpenWrt 24.10.5 on the qualcommax/ipq807x target, and has been supported since 24.10.0. Its WiFi 6 (AX) wireless on the ath11k driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and it is still sold new.

Drivers: Good (0.70) WiFi 6 (AX) Install: moderate

Hardware data and retail listings last checked .

Where to buy

Some links are affiliate links. Learn more.

Specifications

SoC Qualcomm IPQ8072A
CPU 4 cores @ 2200 MHz
RAM 1024 MB
Flash 128 MB (NAND)
Ethernet ports 1 (2.5G)
WiFi generation WiFi 6 (AX)
Radios 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax
WLAN hardware Qualcomm QCN5024, Qualcomm QCN5054
WLAN driver ath11k
OpenWrt target qualcommax / ipq807x
Package architecture aarch64_cortex-a53
Current release 24.10.5
Supported since 24.10.0
Install difficulty moderate
Power supply 12V, 2.0A via barrel, or 802.3at PoE
Device type Access point
Estimated throughput 2200 Mbps
Availability available

Installing OpenWrt on the EAP660 HD

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Other routers to consider

Sinovoip Banana Pi BPi-R3 Mini

WiFi 6 (AX) Drivers: Excellent $109

Huasifei WH3000

WiFi 6 (AX) Drivers: Excellent

GL.iNet GL-MT6000 (Flint 2)

WiFi 6 (AX) Drivers: Excellent $170

Not sure which fits? Take the 60-second quiz.