TP-Link BE450: OpenWrt Compatibility Report
The TP-Link BE450 runs OpenWrt 25.12.5 on the mediatek/filogic target, and has been supported since 25.12.0. Its WiFi 7 (BE) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the TP-Link BE450, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7988D |
|---|---|
| CPU | 3 cores @ 1800 MHz |
| RAM | 512 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 5 (2.5G, 10G) |
| USB | Yes, 1x 3.0 |
| WiFi generation | WiFi 7 (BE) |
| Radios | 2.4GHz: b/g/n/ax/be · 5GHz: a/n/ac/ax/be |
| WLAN hardware | MediaTek MT7992, MediaTek MT7975N, MediaTek MT7979N |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.5 |
| Supported since | 25.12.0 |
| Install method | U-Boot TFTP + serial recovery, see git-commit |
| Install difficulty | moderate |
| Power supply | 12V/2.5A via barrel |
| Device type | Home router |
| Estimated throughput | 1350 Mbps |
| Availability | not_available |
Installing OpenWrt on the BE450
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: U-Boot TFTP + serial recovery, see git-commit.
Official OpenWrt device page for the BE450
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPI-R4
Netcraze NC-1812
GL.iNet GL-BE10000
Not sure which fits? Take the 60-second quiz.