Teltonika RUT955 H7V3C0: OpenWrt Compatibility Report
The Teltonika RUT955 H7V3C0 runs OpenWrt 25.12.1 on the ath79/generic target, and has been supported since 21.02.0. Its WiFi 4 (N) wireless on the ath9k driver rates excellent for open-source driver support (0.85/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Teltonika RUT955 H7V3C0, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Atheros AR9344 |
|---|---|
| CPU | 1 core @ 550 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| Ethernet ports | 4 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Atheros AR9344 |
| WLAN driver | ath9k |
| OpenWrt target | ath79 / generic |
| Package architecture | mips_24kc |
| Current release | 25.12.1 |
| Supported since | 21.02.0 |
| Install method | GUI OEM, U-Boot web recovery, see git-commit |
| Install difficulty | easy |
| Power supply | 9-30 VDC, Passive PoE |
| Device type | Home router |
| Estimated throughput | 68 Mbps |
| Availability | discontinued |
Installing OpenWrt on the RUT955 H7V3C0
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, U-Boot web recovery, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.