Teltonika RUT951: OpenWrt Compatibility Report
The Teltonika RUT951 runs OpenWrt 25.12.2 on the ramips/mt76x8 target, and has been supported since 25.12.0. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated moderate, and it is still sold new.
Drivers: Fair (0.65)
WiFi 4 (N) Install: moderate
Hardware data and retail listings last checked .
Where to buy
- Buy $250
- Network Devices Inc RUT951A00800, in stock $253
- Wilson Amplifiers $269.00 confirmed on page by verifier $269
Some links are affiliate links. Learn more.
Specifications
| SoC | MediaTek MT7628AN |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 128 MB |
| Flash | 16 MB |
| Ethernet ports | 4 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628AN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 25.12.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 9 – 30 VDC |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | available |
Installing OpenWrt on the RUT951
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
GL.iNet GL-X300B (Collie)
WiFi 4 (N) Drivers: Excellent $126
KuWFi CPE830(D)
WiFi 4 (N) Drivers: Excellent
YunCore CPE830(D)
WiFi 4 (N) Drivers: Excellent
Not sure which fits? Take the 60-second quiz.