Telco Electronics T1: OpenWrt Compatibility Report
The Telco Electronics T1 runs OpenWrt 25.12.1 on the ath79/generic target, and has been supported since 21.02.0. Its WiFi 4 (N) wireless on the ath9k driver rates excellent for open-source driver support (0.85/1.0), installation is rated easy, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Telco Electronics T1, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros QCA9531 |
|---|---|
| CPU | 1 core @ 650 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 2 |
| USB | 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Qualcomm Atheros QCA9531 |
| WLAN driver | ath9k |
| OpenWrt target | ath79 / generic |
| Package architecture | mips_24kc |
| Current release | 25.12.1 |
| Supported since | 21.02.0 |
| Install method | Sysupgrade, see git-commit |
| Install difficulty | easy |
| Power supply | 5 VDC, 2.0 A, Passive PoE 24 VDC, 0.5 A |
| Device type | Home router |
| Estimated throughput | 81 Mbps |
| Availability | not_available |
Installing OpenWrt on the T1
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: Sysupgrade, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.