Seeed LinkStar H68K (1432): OpenWrt Compatibility Report
The Seeed LinkStar H68K (1432) runs OpenWrt from snapshot builds only on the rockchip/armv8 target, so there is no stable release for it yet. Its WiFi 6 (AX) wireless on the mt76 driver rates fair for open-source driver support (0.60/1.0), installation is rated moderate, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
- Buy $230
- Seeed Studio manufacturer store, V2 revision, $99.00 Out Of Stock 2026-08-09 Currently out of stock $99
Some links are affiliate links. Learn more.
Specifications
| SoC | Rockchip RK3568 |
|---|---|
| CPU | 4 cores @ 2000 MHz |
| RAM | 4096 MB |
| Ethernet ports | 4 (2.5G) |
| USB | 1x 2.0, 3x 3.0 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek M7921E (M.2 module) |
| WLAN driver | mt76 |
| OpenWrt target | rockchip / armv8 |
| Package architecture | aarch64_generic |
| Current release | snapshot |
| Install method | see forum |
| Install difficulty | moderate |
| Power supply | 12 VDC, 2A via barrel, or 5 VDC via USB Type-C PD |
| Device type | Travel router |
| Estimated throughput | 2000 Mbps |
| Availability | available |
Installing OpenWrt on the LinkStar H68K (1432)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see forum.
Official OpenWrt device page for the LinkStar H68K (1432)
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.