Olimex A13-OLinuXino-WIFI: OpenWrt Compatibility Report
The Olimex A13-OLinuXino-WIFI runs OpenWrt 25.12.1 on the sunxi/cortexa8 target, and has been supported since 14.07. Its WiFi 4 (N) wireless on the rtl819x driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Olimex A13-OLinuXino-WIFI, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Allwinner A13 |
|---|---|
| CPU | 1 core @ 1000 MHz |
| RAM | 512 MB |
| Flash | 4096 MB (NAND) |
| USB | 3x 2.0, 1x OTG |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Realtek RTL8188CUS |
| WLAN driver | rtl819x |
| OpenWrt target | sunxi / cortexa8 |
| Package architecture | arm_cortex-a8_vfpv3 |
| Current release | 25.12.1 |
| Supported since | 14.07 |
| Install method | Sunxi installation |
| Install difficulty | moderate |
| Power supply | 6-16 VDC via barrel |
| Device type | Access point |
| Estimated throughput | 175 Mbps |
| Availability | discontinued |
Installing OpenWrt on the A13-OLinuXino-WIFI
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Sunxi installation.
Official OpenWrt device page for the A13-OLinuXino-WIFI
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.