NETGEAR WNR1000: OpenWrt Compatibility Report
The NETGEAR WNR1000 was supported by OpenWrt from 15.05 on the ar71xx/tiny target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the NETGEAR WNR1000, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Atheros AR7240 |
|---|---|
| CPU | 1 core @ 400 MHz |
| RAM | 32 MB |
| Flash | 4 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Atheros AR9285 |
| WLAN driver | ath9k |
| OpenWrt target | ar71xx / tiny |
| Package architecture | mips_24kc |
| Current release | EOL |
| Supported since | 15.05 |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.0A |
| Device type | Home router |
| Estimated throughput | 50 Mbps |
| Availability | discontinued |
Installing OpenWrt on the WNR1000
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.
Official OpenWrt device page for the WNR1000
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The WNR1000 ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| V2/VC shown above | ar71xx/tiny | EOL | Atheros AR9285 |
| V2 | ar71xx/tiny | EOL | Atheros AR9285 |
| V3 | bcm47xx/mips74k | EOL | Broadcom BCM5356 |
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.