MINEW G1-C: OpenWrt Compatibility Report
The MINEW G1-C runs OpenWrt 25.12.2 on the ramips/mt76x8 target, and has been supported since 21.02.1. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated easy, and it is still sold new.
Drivers: Fair (0.65)
WiFi 4 (N) Install: easy
Hardware data and retail listings last checked .
Where to buy
- Minew Store manufacturer store, USD 65.00, 96 in stock, Add to cart + Buy Now live, no quote wall; Wi-Fi/Ethernet uplink, checked 2026-08-10 $65
- DigiKey base G1 SKU; marketplace item, ships from Minew in ~7 days, $40 flat shipping $78
Some links are affiliate links. Learn more.
Specifications
| SoC | MediaTek MT7628AN |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 1 |
| USB | 2x 2.0, 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628AN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 21.02.1 |
| Install method | Sysupgrade |
| Install difficulty | easy |
| Power supply | 5 VDC via µUSB, PoE 802.11af |
| Device type | Access point |
| Estimated throughput | 72 Mbps |
| Availability | available |
Installing OpenWrt on the G1-C
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: Sysupgrade.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
GL.iNet GL-X300B (Collie)
WiFi 4 (N) Drivers: Excellent $126
KuWFi CPE830(D)
WiFi 4 (N) Drivers: Excellent
YunCore CPE830(D)
WiFi 4 (N) Drivers: Excellent
Not sure which fits? Take the 60-second quiz.