MikroTik RB931-2nD (hAP mini): OpenWrt Compatibility Report
The MikroTik RB931-2nD (hAP mini) was supported by OpenWrt from 19.07.0 on the ar71xx/mikrotik target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the MikroTik RB931-2nD (hAP mini). See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm Atheros QCA9533 |
|---|---|
| CPU | 1 core @ 650 MHz |
| RAM | 32 MB |
| Flash | 16 MB |
| Ethernet ports | 3 |
| USB | 1x µUSB (power) |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Qualcomm Atheros QCA9533 |
| WLAN driver | ath9k |
| OpenWrt target | ar71xx / mikrotik |
| Package architecture | mips_24kc |
| Current release | EOL |
| Supported since | 19.07.0 |
| Install method | Mikrotik TFTP, see git-commit |
| Install difficulty | moderate |
| Power supply | 5 VDC (µUSB) |
| Device type | Access point |
| Estimated throughput | 81 Mbps |
| Availability | available |
Installing OpenWrt on the RB931-2nD (hAP mini)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: Mikrotik TFTP, see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.