MikroTik LtAP-2HnD: OpenWrt Compatibility Report

MikroTik LtAP-2HnD router

The MikroTik LtAP-2HnD runs OpenWrt 25.12.2 on the ramips/mt7621 target, and has been supported since 23.05.0. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is still sold new.

Drivers: Fair (0.50) WiFi 4 (N) Install: moderate

Hardware data and retail listings last checked .

Where to buy

Some links are affiliate links. Learn more.

Specifications

SoC MediaTek MT7621A
CPU 2 cores @ 880 MHz
RAM 128 MB
Flash 16 MB
Ethernet ports 1
USB 1x 2.0
WiFi generation WiFi 4 (N)
Radios 2.4GHz: b/g/n
WLAN hardware Atheros AR9382
WLAN driver ath9k
OpenWrt target ramips / mt7621
Package architecture mipsel_24kc
Current release 25.12.2
Supported since 23.05.0
Install method see git-commit
Install difficulty moderate
Power supply 12-30V via barrel or 12-27V via automotive or 12-30V Passive PoE
Device type Access point
Estimated throughput 220 Mbps
Availability available

Installing OpenWrt on the LtAP-2HnD

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Other routers to consider

GL.iNet GL-X300B (Collie)

WiFi 4 (N) Drivers: Excellent $126

KuWFi CPE830(D)

WiFi 4 (N) Drivers: Excellent

YunCore CPE830(D)

WiFi 4 (N) Drivers: Excellent

Not sure which fits? Take the 60-second quiz.