Microchip SAMA7G5 EK: OpenWrt Compatibility Report
The Microchip SAMA7G5 EK runs OpenWrt 25.12.0 on the at91/sama7 target, and has been supported since 22.03.0. Its WiFi 4 (N) wireless rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is still sold new.
Drivers: Fair (0.50)
WiFi 4 (N) Install: moderate
Hardware data and retail listings last checked .
Where to buy
- DigiKey Active part, 0 in stock, backorderable; 1 unit expected 2026-08-18 Currently out of stock $403
- Microchip Direct manufacturer's own store listing
Some links are affiliate links. Learn more.
Specifications
| SoC | Microchip SAMA7G5 |
|---|---|
| CPU | 1 core @ 1000 MHz |
| RAM | 512 MB |
| Flash | 128 MB |
| Ethernet ports | 2 |
| USB | 3x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Microchip ATWILC3000 |
| OpenWrt target | at91 / sama7 |
| Package architecture | arm_cortex-a7_neon-vfpv4 |
| Current release | 25.12.0 |
| Supported since | 22.03.0 |
| Install method | SD card |
| Install difficulty | moderate |
| Power supply | 5 VDC, 2A via barrel, or micro-USB |
| Device type | Home router |
| Estimated throughput | 175 Mbps |
| Availability | available |
Installing OpenWrt on the SAMA7G5 EK
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: SD card.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
GL.iNet GL-X300B (Collie)
WiFi 4 (N) Drivers: Excellent $126
KuWFi CPE830(D)
WiFi 4 (N) Drivers: Excellent
YunCore CPE830(D)
WiFi 4 (N) Drivers: Excellent
Not sure which fits? Take the 60-second quiz.