Microchip SAMA5D27 WLSOM1 EK: OpenWrt Compatibility Report
The Microchip SAMA5D27 WLSOM1 EK runs OpenWrt 25.12.0 on the at91/sama5 target, and has been supported since 22.03.0. Its WiFi 4 (N) wireless rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Microchip SAMA5D27 WLSOM1 EK. See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | Atmel ATSAMA5D27C-LD2G-CU |
|---|---|
| CPU | 1 core @ 500 MHz |
| RAM | 256 MB |
| Flash | 8 MB |
| Ethernet ports | 1 |
| USB | 2x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Microchip ATWILC3000-MR110UA |
| OpenWrt target | at91 / sama5 |
| Package architecture | arm_cortex-a5_vfpv4 |
| Current release | 25.12.0 |
| Supported since | 22.03.0 |
| Install method | SD card |
| Install difficulty | moderate |
| Power supply | 5V, 2A via microUSB |
| Device type | Access point |
| Estimated throughput | 87 Mbps |
| Availability | available |
Installing OpenWrt on the SAMA5D27 WLSOM1 EK
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: SD card.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.