Linksys WRTSL54GS: OpenWrt Compatibility Report
The Linksys WRTSL54GS was supported by OpenWrt from 0.9 on the bcm47xx/legacy target, but its last supported release has reached end of life. Its Pre-WiFi 4 (802.11a/b/g) wireless on the b43 driver rates limited for open-source driver support (0.35/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Linksys WRTSL54GS, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM4704 |
|---|---|
| CPU | 1 core @ 264 MHz |
| RAM | 32 MB |
| Flash | 8 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | Pre-WiFi 4 (802.11a/b/g) |
| Radios | 2.4GHz: b/g |
| WLAN hardware | Broadcom BCM4704 |
| WLAN driver | b43 |
| OpenWrt target | bcm47xx / legacy |
| Package architecture | mipsel_mips32 |
| Current release | EOL |
| Supported since | 0.9 |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.0A |
| Device type | Home router |
| Estimated throughput | 33 Mbps |
| Availability | discontinued |
Installing OpenWrt on the WRTSL54GS
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.
Official OpenWrt device page for the WRTSL54GS
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPI-R4
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
Not sure which fits? Take the 60-second quiz.