Linksys WRT350N: OpenWrt Compatibility Report
The Linksys WRT350N was supported by OpenWrt from 15.05 on the bcm47xx/generic target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the b43 driver rates limited for open-source driver support (0.35/1.0), installation is rated moderate, and it is no longer sold new. Its wireless does not work correctly under OpenWrt, so it is listed here for reference rather than as a recommendation.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Linksys WRT350N, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM4785 |
|---|---|
| CPU | 1 core @ 300 MHz |
| RAM | 32 MB |
| Flash | 8 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Broadcom (cardbus) |
| WLAN driver | b43 |
| OpenWrt target | bcm47xx / generic |
| Package architecture | mipsel_mips32 |
| Current release | EOL |
| Supported since | 15.05 |
| Install method | CFE TFTP recovery, see devicepage |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.25A |
| Device type | Home router |
| Estimated throughput | 37 Mbps |
| Availability | discontinued |
Installing OpenWrt on the WRT350N
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: CFE TFTP recovery, see devicepage.
Official OpenWrt device page for the WRT350N
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.