Linksys MX6200: OpenWrt Compatibility Report

Linksys MX6200 router
Image: OpenWrt Table of Hardware, CC BY-SA 4.0

The Linksys MX6200 runs OpenWrt 25.12.2 on the qualcommax/ipq50xx target, and has been supported since 25.12.0. Its WiFi 6E wireless on the ath11k driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and it is still sold new.

Drivers: Good (0.70) WiFi 6E Install: moderate

Hardware data and retail listings last checked .

Where to buy

Some links are affiliate links. Learn more.

Specifications

SoC Qualcomm IPQ5018
CPU 2 cores @ 1000 MHz
RAM 512 MB
Flash 256 MB (NAND)
Ethernet ports 2
WiFi generation WiFi 6E
Radios 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax · 6GHz: ax
WLAN hardware Qualcomm IPQ5018, Qualcomm QCN6102, Qualcomm QCN6122
WLAN driver ath11k
OpenWrt target qualcommax / ipq50xx
Package architecture aarch64_cortex-a53
Current release 25.12.2
Supported since 25.12.0
Install method see git-commit
Install difficulty moderate
Power supply 12 VDC, 2.5A via barrel
Device type Home router
Estimated throughput 500 Mbps
Availability available

Installing OpenWrt on the MX6200

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Other routers to consider

Acer Connect Vero W6m

WiFi 6E Drivers: Excellent $71

Cambium Networks XE3-4

WiFi 6E Drivers: Good $785

Linksys MR7500/MR75MS/MR75WH

WiFi 6E Drivers: Good $65

Not sure which fits? Take the 60-second quiz.