Linksys HomeWRK: OpenWrt Compatibility Report
The Linksys HomeWRK runs OpenWrt 25.12.5 on the qualcommax/ipq807x target, and has been supported since 24.10.3. Its WiFi 6 (AX) wireless on the ath11k driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Linksys HomeWRK, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm IPQ8174 |
|---|---|
| CPU | 4 cores @ 1400 MHz |
| RAM | 2048 MB |
| Flash | 1024 MB (NAND) |
| Ethernet ports | 4 |
| USB | 1x 3.0 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | Qualcomm QCN5024, 2x Qualcomm QCN5054 |
| WLAN driver | ath11k |
| OpenWrt target | qualcommax / ipq807x |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.5 |
| Supported since | 24.10.3 |
| Install method | U-Boot USB recovery, see devicepage, see git-commit |
| Install difficulty | moderate |
| Device type | Home router |
| Estimated throughput | 1000 Mbps |
| Availability | discontinued |
Installing OpenWrt on the HomeWRK
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: U-Boot USB recovery, see devicepage, see git-commit.
Official OpenWrt device page for the HomeWRK
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.