Keenetic KN-3711 (Sprinter): OpenWrt Compatibility Report
The Keenetic KN-3711 (Sprinter) runs OpenWrt from snapshot builds only on the mediatek/filogic target, so there is no stable release for it yet. Its WiFi 6 (AX) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated moderate, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Keenetic KN-3711 (Sprinter). See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | MediaTek MT7981BA |
|---|---|
| CPU | 2 cores @ 1300 MHz |
| RAM | 512 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 4 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7976CN |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | snapshot |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1 A |
| Device type | Repeater |
| Estimated throughput | 650 Mbps |
| Availability | available |
Installing OpenWrt on the KN-3711 (Sprinter)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.