Jotale JS7628: OpenWrt Compatibility Report
The Jotale JS7628 runs OpenWrt 25.12.2 on the ramips/mt76x8 target, and has been supported since 21.02.0. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Jotale JS7628, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7628 |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 3 |
| USB | 4x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628 |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 21.02.0 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 5V/1A via barrel |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | not_available |
Installing OpenWrt on the JS7628
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The JS7628 ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| 8M shown above | ramips/mt76x8 | 25.12.2 | MediaTek MT7628 |
| 16M | ramips/mt76x8 | 25.12.2 | MediaTek MT7628 |
| 32M | ramips/mt76x8 | 25.12.2 | MediaTek MT7628 |
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.