JDCloud RE-SS-01 (Arthur): OpenWrt Compatibility Report
The JDCloud RE-SS-01 (Arthur) runs OpenWrt from snapshot builds only on the qualcommax/ipq60xx target, so there is no stable release for it yet. Its WiFi 6 (AX) wireless on the ath11k driver rates good for open-source driver support (0.70/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the JDCloud RE-SS-01 (Arthur), which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Qualcomm IPQ6000 |
|---|---|
| CPU | 4 cores @ 1200 MHz |
| RAM | 512 MB |
| Ethernet ports | 4 |
| USB | 1x 3.0 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | Qualcomm QCN5022, Qualcomm QCN5052 |
| WLAN driver | ath11k |
| OpenWrt target | qualcommax / ipq60xx |
| Package architecture | aarch64_cortex-a53 |
| Current release | snapshot |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 2A via barrel |
| Device type | Home router |
| Estimated throughput | 1000 Mbps |
| Availability | not_available |
Installing OpenWrt on the RE-SS-01 (Arthur)
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.