Iomega NAS 100d: OpenWrt Compatibility Report
The Iomega NAS 100d runs OpenWrt 24.10.4 on the ixp4xx/generic target, and has been supported since 7.09. Its Pre-WiFi 4 (802.11a/b/g) wireless on the ath5k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Iomega NAS 100d, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Intel IXP420BB |
|---|---|
| CPU | 1 core @ 266 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 1 |
| USB | 2x 2.0 |
| WiFi generation | Pre-WiFi 4 (802.11a/b/g) |
| Radios | 2.4GHz: b/g |
| WLAN hardware | Atheros AR5213A |
| WLAN driver | ath5k |
| OpenWrt target | ixp4xx / generic |
| Package architecture | armeb_xscale |
| Current release | 24.10.4 |
| Supported since | 7.09 |
| Install difficulty | moderate |
| Power supply | 12V/3A barrel |
| Device type | Wired only |
| Estimated throughput | 46 Mbps |
| Availability | discontinued |
Installing OpenWrt on the NAS 100d
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.
Official OpenWrt device page for the NAS 100d
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPI-R4
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
Not sure which fits? Take the 60-second quiz.