H3C TX1806: OpenWrt Compatibility Report
The H3C TX1806 runs OpenWrt 25.12.3 on the ramips/mt7621 target, and has been supported since 23.05.0. Its WiFi 6 (AX) wireless on the mt76 driver rates good for open-source driver support (0.80/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the H3C TX1806, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7621AT |
|---|---|
| CPU | 2 cores @ 880 MHz |
| RAM | 256 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 4 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7905DAN, MediaTek MT7975DN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7621 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.3 |
| Supported since | 23.05.0 |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | 12V, 1.5A |
| Device type | Home router |
| Estimated throughput | 220 Mbps |
| Availability | not_available |
Installing OpenWrt on the TX1806
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
More details on GitHub https://github.com/openwrt/openwrt/pull/9488
Official OpenWrt device page for the TX1806
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.