GL.iNet GL-X2000 (Spitz Plus): OpenWrt Compatibility Report
The GL.iNet GL-X2000 (Spitz Plus) runs OpenWrt from snapshot builds only on the qualcommax/ipq50xx target, so there is no stable release for it yet. Its WiFi 6 (AX) wireless on the ath11k driver rates good for open-source driver support (0.70/1.0), installation is rated easy, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the GL.iNet GL-X2000 (Spitz Plus). See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | Qualcomm IPQ5018 |
|---|---|
| CPU | 2 cores @ 1000 MHz |
| RAM | 512 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 2 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | Qualcomm IPQ5018, Qualcomm QCN6122 |
| WLAN driver | ath11k |
| OpenWrt target | qualcommax / ipq50xx |
| Package architecture | aarch64_cortex-a53 |
| Current release | snapshot |
| Install method | GL.Inet installation, U-Boot web recovery, see git-commit |
| Install difficulty | easy |
| Power supply | 12V, 2.5A via barrel (accepts 9-35V DC) |
| Device type | Home router |
| Estimated throughput | 500 Mbps |
| Availability | available |
Installing OpenWrt on the GL-X2000 (Spitz Plus)
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GL.Inet installation, U-Boot web recovery, see git-commit.
Flash the factory image from the GL.iNet web UI
Official OpenWrt device page for the GL-X2000 (Spitz Plus)
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.