GL.iNet GL-BE10000: OpenWrt Compatibility Report
The GL.iNet GL-BE10000 runs OpenWrt from snapshot builds only on the mediatek/filogic target, so there is no stable release for it yet. Its WiFi 7 (BE) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated easy, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the GL.iNet GL-BE10000. See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | MediaTek MT7987A |
|---|---|
| CPU | 4 cores @ 2000 MHz |
| RAM | 1024 MB |
| Flash | 512 MB (NAND) |
| Ethernet ports | 2 (2.5G) |
| USB | 1x 3.0, 1x Power only |
| WiFi generation | WiFi 7 (BE) |
| Radios | 2.4GHz: b/g/n/ax/be · 5GHz: a/n/ac/ax/be · 6GHz: ax/be |
| WLAN hardware | MediaTek MT7995AV |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | snapshot |
| Install method | U-Boot web recovery |
| Install difficulty | easy |
| Power supply | 5V/3A, 9V/3A, or 12V/2.5A via USB Type-C |
| Device type | Home router |
| Estimated throughput | 2000 Mbps |
| Availability | available |
Installing OpenWrt on the GL-BE10000
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: U-Boot web recovery.
Flash sysupgrade over OEM firmware and do not keep settings
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPI-R4
Netcraze NC-1812
ASUS ZenWiFi BT8
Not sure which fits? Take the 60-second quiz.