Frys FR-54RTR: OpenWrt Compatibility Report
The Frys FR-54RTR was supported by OpenWrt from 15.05.1 on the ar71xx/generic target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Frys FR-54RTR, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Atheros AR7240 |
|---|---|
| CPU | 1 core @ 400 MHz |
| RAM | 32 MB |
| Flash | 4 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Atheros AR9285 |
| WLAN driver | ath9k |
| OpenWrt target | ar71xx / generic |
| Package architecture | mips_24kc |
| Current release | EOL |
| Supported since | 15.05.1 |
| Install method | D-Link Recovery GUI |
| Install difficulty | easy |
| Power supply | 5 VDC, 1.2A |
| Device type | Home router |
| Estimated throughput | 50 Mbps |
| Availability | discontinued |
Installing OpenWrt on the FR-54RTR
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: D-Link Recovery GUI.
Official OpenWrt device page for the FR-54RTR
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.