FriendlyARM NanoPi R4S: OpenWrt Compatibility Report

FriendlyARM NanoPi R4S router

The FriendlyARM NanoPi R4S runs OpenWrt 25.12.5 on the rockchip/armv8 target, and has been supported since 22.03.0. Its No WiFi wireless on the none driver rates fair for open-source driver support (0.60/1.0), installation is rated moderate, and it is still sold new.

Drivers: Fair (0.60) No WiFi Install: moderate

Hardware data and retail listings last checked .

Where to buy

Some links are affiliate links. Learn more.

Specifications

SoC Rockchip RK3399
CPU 6 cores @ 2000 MHz
RAM 4096 MB
Ethernet ports 2
USB 2x 3.0
WiFi generation No WiFi
WLAN driver none
OpenWrt target rockchip / armv8
Package architecture aarch64_generic
Current release 25.12.5
Supported since 22.03.0
Install method SD card
Install difficulty moderate
Power supply 5 VDC, 3.0A via USB Type-C
Device type Wired only
Estimated throughput 1000 Mbps
Availability available

Installing OpenWrt on the NanoPi R4S

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: SD card.

Decompress then flash image to an SD card

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Hardware versions

The NanoPi R4S ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.

Version Target Current release WLAN hardware
Base version shown above rockchip/armv8 25.12.5 -
ENTERPRISE/EDITION rockchip/armv8 25.12.5 -

Other routers to consider

Deciso DEC740

No WiFi Drivers: Good

Mellanox Spectrum SN3420

No WiFi Drivers: Good $24974

Mellanox Spectrum SN2700

No WiFi Drivers: Good $7995

Not sure which fits? Take the 60-second quiz.