FriendlyARM NanoPi NEO Core2: OpenWrt Compatibility Report
The FriendlyARM NanoPi NEO Core2 runs OpenWrt 25.12.1 on the sunxi/cortexa53 target, and has been supported since 18.06.0. Its No WiFi wireless on the none driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the FriendlyARM NanoPi NEO Core2. See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | Allwinner H5 |
|---|---|
| CPU | 4 cores @ 1500 MHz |
| RAM | 1024 MB |
| Ethernet ports | 1 |
| USB | 1x Header, 1x OTG |
| WiFi generation | No WiFi |
| WLAN driver | none |
| OpenWrt target | sunxi / cortexa53 |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.1 |
| Supported since | 18.06.0 |
| Install method | Sysupgrade, SD card, U-Boot USB recovery |
| Install difficulty | easy |
| Power supply | 5 VDC, 2.0 A via USB Female Micro-B |
| Device type | Single-board computer |
| Estimated throughput | 1000 Mbps |
| Availability | available |
Installing OpenWrt on the NanoPi NEO Core2
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: Sysupgrade, SD card, U-Boot USB recovery.
Similar to install method for Raspberry Pi
Official OpenWrt device page for the NanoPi NEO Core2
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Deciso DEC740
Mellanox Spectrum SN3420
Mellanox Spectrum SN2700
Not sure which fits? Take the 60-second quiz.