Fon Fonera 2.0n: OpenWrt Compatibility Report

The Fon Fonera 2.0n runs OpenWrt 25.12.1 on the ramips/rt305x target, and has been supported since 12.09. Its WiFi 4 (N) wireless on the rt2800pci driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.

Drivers: Fair (0.50) WiFi 4 (N) Install: moderate

Hardware data and retail listings last checked .

Discontinued. This model is no longer sold new, so this page is kept as a reference for people who already own one. See current alternatives.

Where to buy

We have no current retail listing for the Fon Fonera 2.0n, which is no longer sold new. See current alternatives for devices you can still buy today.

Specifications

SoC Ralink RT3052 v2
CPU 1 core @ 384 MHz
RAM 64 MB
Flash 8 MB
Ethernet ports 5
USB 1x 2.0
WiFi generation WiFi 4 (N)
Radios 2.4GHz: b/g/n
WLAN hardware Ralink RT3052
WLAN driver rt2800pci
OpenWrt target ramips / rt305x
Package architecture mipsel_24kc
Current release 25.12.1
Supported since 12.09
Install method see devicepage
Install difficulty moderate
Device type Home router
Estimated throughput 48 Mbps
Availability discontinued

Installing OpenWrt on the Fonera 2.0n

Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.

Official OpenWrt device page for the Fonera 2.0n

Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.

Still sold and well supported

GL.iNet GL-X300B (Collie)

WiFi 4 (N) Drivers: Excellent $126

KuWFi CPE830(D)

WiFi 4 (N) Drivers: Excellent

YunCore CPE830(D)

WiFi 4 (N) Drivers: Excellent

Not sure which fits? Take the 60-second quiz.