EnGenius EWS2910P: OpenWrt Compatibility Report
The EnGenius EWS2910P runs OpenWrt 25.12.1 on the realtek/rtl838x target, and has been supported since 23.05.0. Its No WiFi wireless on the none driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the EnGenius EWS2910P, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Realtek RTL8380M |
|---|---|
| CPU | 1 core @ 500 MHz |
| RAM | 256 MB |
| Flash | 32 MB |
| Ethernet ports | 8 |
| WiFi generation | No WiFi |
| WLAN hardware | - |
| WLAN driver | none |
| OpenWrt target | realtek / rtl838x |
| Package architecture | mips_4kec |
| Current release | 25.12.1 |
| Supported since | 23.05.0 |
| Install method | GUI OEM, U-Boot TFTP + serial recovery, see git-commit |
| Install difficulty | easy |
| Power supply | 48-54 VDC, 1.75A |
| Device type | Wired only |
| Estimated throughput | 62 Mbps |
| Availability | discontinued |
Installing OpenWrt on the EWS2910P
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, U-Boot TFTP + serial recovery, see git-commit.
Official OpenWrt device page for the EWS2910P
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The EWS2910P ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| Base version shown above | realtek/rtl838x | 25.12.1 | - |
| V3 | realtek/rtl838x | 25.12.1 | - |
Still sold and well supported
Deciso DEC740
Mellanox Spectrum SN3420
Mellanox Spectrum SN2700
Not sure which fits? Take the 60-second quiz.