D-Link DSL-2650U/BRU/D: OpenWrt Compatibility Report
The D-Link DSL-2650U/BRU/D was supported by OpenWrt from 10.03 on the bcm63xx/generic target, but its last supported release has reached end of life. Its Pre-WiFi 4 (802.11a/b/g) wireless on the b43 driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the D-Link DSL-2650U/BRU/D, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM6358 |
|---|---|
| CPU | 2 cores @ 300 MHz |
| RAM | 32 MB |
| Flash | 8 MB |
| Ethernet ports | 5 |
| USB | 1x 2.0 |
| WiFi generation | Pre-WiFi 4 (802.11a/b/g) |
| Radios | 2.4GHz: b/g |
| WLAN hardware | Broadcom BCM4318 |
| WLAN driver | b43 |
| OpenWrt target | bcm63xx / generic |
| Package architecture | mips_mips32 |
| Current release | EOL |
| Supported since | 10.03 |
| Install method | CFE web recovery, see devicepage |
| Install difficulty | easy |
| Device type | Home router |
| Estimated throughput | 75 Mbps |
| Availability | discontinued |
Installing OpenWrt on the DSL-2650U/BRU/D
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: CFE web recovery, see devicepage.
Official OpenWrt device page for the DSL-2650U/BRU/D
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPI-R4
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
Not sure which fits? Take the 60-second quiz.